INTRODUCTION ABOUT CELL PHONE WORKING

INTRODUCTION ABOUT CELL PHONE WORKING

 

Millions of people in the United States and around the world use cellular phones. They are such great gadgets -- with a cell phone, you can talk to anyone on the planet from just about anywhere!

These days, cell phones provide an incredible array of functions, and new ones are being added at a breakneck pace. Depending on the cell-phone model, you can:

• Store contact information
• Make task or to-do lists
• Keep track of appointments and set reminders
• Use the built-in calculator for simple math
• Send or receive e-mail
• Get information (news, entertainment, stock quotes) from the Internet
• Play simple games
• Integrate other devices such as PDAs, MP3 players and GPS receivers

But have you ever wondered how a cell phone works? What makes it different from a regular phone? What do all those confusing terms like PCS, GSM, CDMA and TDMA mean? In this article, we will discuss the technology behind cell phones so that you can see how amazing they really are.

The Cell Approach

 

One of the most interesting things about a cell phone is that it is actually a radio -- an extremely sophisticated radio, but a radio nonetheless. The telephone was invented by Alexander Graham Bell in 1876, and wireless communication can trace its roots to the invention of the radio by Nikolai Tesla in the 1880s (formally presented in 1894 by a young Italian named Guglielmo Marconi). It was only natural that these two great technologies would eventually be combined!

In the dark ages before cell phones, people who really needed mobile-communications ability installed radio telephones in their cars. In the radio-telephone system, there was one central antenna tower per city, and perhaps 25 channels available on that tower. This central antenna meant that the phone in your car needed a powerful transmitter -- big enough to transmit 40 or 50 miles (about 70 km). It also meant that not many people could use radio telephones -- there just were not enough channels.

The genius of the cellular system is the division of a city into small cells. This allows extensive frequency reuse across a city, so that millions of people can use cell phones simultaneously. In the next section, we'll look closer at these cells.

Cell Engineering
In a typical analog cell-phone system in the United States, the cell-phone carrier receives about 800 frequencies to use across the city. The carrier chops up the city into cells. Each cell is typically sized at about 10 square miles (26 square kilometers). Cells are normally thought of as hexagons on a big hexagonal grid, like this:

 

Cool Facts Most newer digital cellular phones have some sort of entertainment programs on them, ranging from simple dice-throwing games to memory and logic puzzles. Approximately 20 percent of American teens (more girls than boys) own a cellular phone. Cellular phones are more popular in European and Asian countries than they are in the United States -- more than 90 percent of Europeans or Asians own a cell phone, compared to about 50 percent of Americans.

Because cell phones and base stations use low-power transmitters, the same frequencies can be reused in non-adjacent cells. The two purple cells can reuse the same frequencies.

Each cell has a base station that consists of a tower and a small building containing the radio equipment (more on base stations later

Frequencies
A single cell in an analog system uses one-seventh of the available duplex voice channels. That is, each cell (of the seven on a hexagonal grid) is using one-seventh of the available channels so it has a unique set of frequencies and there are no collisions:

• A cell-phone carrier typically gets 832 radio frequencies to use in a city.
• Each cell phone uses two frequencies per call -- a duplex channel -- so there are typically 395 voice channels per carrier. (The other 42 frequencies are used for control channels -- more on this on the next page.)
• Therefore, each cell has about 56 voice channels available.

In other words, in any cell, 56 people can be talking on their cell phone at one time. With digital transmission methods, the number of available channels increases. For example, a TDMA-based digital system can carry three times as many calls as an analog system, so each cell has about 168 channels available.

Transmission
Cell phones have low-power transmitters in them. Many cell phones have two signal strengths: 0.6 watts and 3 watts (for comparison, most CB radios transmit at 4 watts). The base station is also transmitting at low power. Low-power transmitters have two advantages:

• The transmissions of a base station and the phones within its cell do not make it very far outside that cell. Therefore, in the figure above, both of the purple cells can reuse the same 56 frequencies. The same frequencies can be reused extensively across the city.
• The power consumption of the cell phone, which is normally battery-operated, is relatively low. Low power means small batteries, and this is what has made handheld cellular phones possible.

The cellular approach requires a large number of base stations in a city of any size. A typical large city can have hundreds of towers. But because so many people are using cell phones, costs remain low per user. Each carrier in each city also runs one central office called the Mobile Telephone Switching Office (MTSO). This office handles all of the phone connections to the normal land-based phone system, and controls all of the base stations in the region.

 

Cell Phone Codes
All cell phones have special codes associated with them. These codes are used to identify the phone, the phone's owner and the service provider.

Cell Phone Codes   Electronic Serial Number (ESN) - a unique 32-bit number programmed into the phone when it is manufactured Mobile Identification Number (MIN) - a 10-digit number derived from your phone's number System Identification Code (SID) - a unique 5-digit number that is assigned to each carrier by the FCC While the ESN is considered a permanent part of the phone, both the MIN and SID codes are programmed into the phone when you purchase a service plan and have the phone activated.

Let's say you have a cell phone, you turn it on and someone tries to call you. Here is what happens to the call:

• When you first power up the phone, it listens for an SID (see sidebar) on the control channel. The control channel is a special frequency that the phone and base station use to talk to one another about things like call set-up and channel changing. If the phone cannot find any control channels to listen to, it knows it is out of range and displays a "no service" message.
• When it receives the SID, the phone compares it to the SID programmed into the phone. If the SIDs match, the phone knows that the cell it is communicating with is part of its home system.
• Along with the SID, the phone also transmits a registration request, and the MTSO keeps track of your phone's location in a database -- this way, the MTSO knows which cell you are in when it wants to ring your phone.
• The MTSO gets the call, and it tries to find you. It looks in its database to see which cell you are in.
• The MTSO picks a frequency pair that your phone will use in that cell to take the call.
• The MTSO communicates with your phone over the control channel to tell it which frequencies to use, and once your phone and the tower switch on those frequencies, the call is connected. You are talking by two-way radio to a friend!
• As you move toward the edge of your cell, your cell's base station notes that your signal strength is diminishing. Meanwhile, the base station in the cell you are moving toward (which is listening and measuring signal strength on all frequencies, not just its own one-seventh) sees your phone's signal strength increasing. The two base stations coordinate with each other through the MTSO, and at some point, your phone gets a signal on a control channel telling it to change frequencies. This hand off switches your phone to the new cell.

As you travel, the signal is passed from cell to cell.

Roaming
If the SID on the control channel does not match the SID programmed into your phone, then the phone knows it is roaming. The MTSO of the cell that you are roaming in contacts the MTSO of your home system, which then checks its database to confirm that the SID of the phone you are using is valid. Your home system verifies your phone to the local MTSO, which then tracks your phone as you move through its cells. And the amazing thing is that all of this happens within seconds!

Cell Phones and CBs
A good way to understand the sophistication of a cell phone is to compare it to a CB radio or a walkie-talkie.

• Full-duplex vs. half-duplex - Both walkie-talkies and CB radios are half-duplex devices. That is, two people communicating on a CB radio use the same frequency, so only one person can talk at a time. A cell phone is a full-duplex device. That means that you use one frequency for talking and a second, separate frequency for listening. Both people on the call can talk at once.
• Channels - A walkie-talkie typically has one channel, and a CB radio has 40 channels. A typical cell phone can communicate on 1,664 channels or more!
• Range - A walkie-talkie can transmit about 1 mile (1.6 km) using a 0.25-watt transmitter. A CB radio, because it has much higher power, can transmit about 5 miles (8 km) using a 5-watt transmitter. Cell phones operate within cells, and they can switch cells as they move around. Cells give cell phones incredible range. Someone using a cell phone can drive hundreds of miles and maintain a conversation the entire time because of the cellular approach.

In half-duplex radio, both transmitters use the same frequency. Only one party can talk at a time.

In full-duplex radio, the two transmitters use different frequencies, so both parties can talk at the same time. Cell phones are full-duplex

 

 

Inside a Cell Phone
On a "complexity per cubic inch" scale, cell phones are some of the most intricate devices people play with on a daily basis. Modern digital cell phones can process millions of calculations per second in order to compress and decompress the voice stream.

The parts of a cell phone

If you take a cell phone apart, you find that it contains just a few individual parts:

• An amazing circuit board containing the brains of the phone
• An antenna
• A liquid crystal display (LCD)
• A keyboard (not unlike the one you find in a TV remote control)
• A microphone
• A speaker
• A battery

On the Circuit Board
The circuit board is the heart of the system. Here is one from a typical Nokia digital phone:

The front of the circuit board

The back of the circuit board

In the photos above, you see several computer chips. Let's talk about what some of the individual chips do. The analog-to-digital and digital-to-analog conversion chips translate the outgoing audio signal from analog to digital and the incoming signal from digital back to analog. . The digital signal processor (DSP) is a highly customized processor designed to perform signal-manipulation calculations at high speed.

The microprocessor handles all of the housekeeping chores for the keyboard and display, deals with command and control signaling with the base station and also coordinates the rest of the functions on the board.

The microprocessor

The ROM and Flash memory chips provide storage for the phone's operating system and customizable features, such as the phone directory. The radio frequency (RF) and power section handles power management and recharging, and also deals with the hundreds of FM channels. Finally, the RF amplifiers handle signals traveling to and from the antenna.

The display and keypad contacts

The display has grown considerably in size as the number of features in cell phones have increased. Most current phones offer built-in phone directories, calculators and even games. And many of the phones incorporate some type of PDA or Web browser.

The Flash memory card on the circuit board

The Flash memory card removed

Some phones store certain information, such as the SID and MIN codes, in internal Flash memory, while others use external cards that are similar to SmartMedia cards.

The cell-phone speaker, microphone and battery backup

Cell phones have such tiny speakers and microphones that it is incredible how well most of them reproduce sound. As you can see in the picture above, the speaker is about the size of a dime and the microphone is no larger than the watch battery beside it. Speaking of the watch battery, this is used by the cell phone's internal clock chip.

What is amazing is that all of that functionality -- which only 30 years ago would have filled an entire floor of an office building -- now fits into a package that sits comfortably in the palm of your hand!

AMPS

Photo courtesy Motorola, Inc. Old school: DynaTAC cell phone, 1983

In 1983, the analog cell-phone standard called AMPS (Advanced Mobile Phone System) was approved by the FCC and first used in Chicago. AMPS uses a range of frequencies between 824 megahertz (MHz) and 894 MHz for analog cell phones. In order to encourage competition and keep prices low, the U. S. government required the presence of two carriers in every market, known as A and B carriers. One of the carriers was normally the local-exchange carrier (LEC), a fancy way of saying the local phone company.

Carriers A and B are each assigned 832 frequencies: 790 for voice and 42 for data. A pair of frequencies (one for transmit and one for receive) is used to create one channel. The frequencies used in analog voice channels are typically 30 kHz wide -- 30 kHz was chosen as the standard size because it gives you voice quality comparable to a wired telephone.

The transmit and receive frequencies of each voice channel are separated by 45 MHz to keep them from interfering with each other. Each carrier has 395 voice channels, as well as 21 data channels to use for housekeeping activities like registration and paging.

A version of AMPS known as Narrowband Advanced Mobile Phone Service (NAMPS) incorporates some digital technology to allow the system to carry about three times as many calls as the original version. Even though it uses digital technology, it is still considered analog. AMPS and NAMPS only operate in the 800-MHz band and do not offer many of the features common in digital cellular service, such as e-mail and Web browsing.

Along Comes Digital
Digital cell phones use the same radio technology as analog phones, but they use it in a different way. Analog systems do not fully utilize the signal between the phone and the cellular network -- analog signals cannot be compressed and manipulated as easily as a true digital signal. This is the reason why many cable companies are switching to digital -- so they can fit more channels within a given bandwidth. It is amazing how much more efficient digital systems can be.

Digital phones convert your voice into binary information (1s and 0s) and then compress it . This compression allows between three and 10 digital cell-phone calls to occupy the space of a single analog call.

Many digital cellular systems rely on frequency-shift keying (FSK) to send data back and forth over AMPS. FSK uses two frequencies, one for 1s and the other for 0s, alternating rapidly between the two to send digital information between the cell tower and the phone. Clever modulation and encoding schemes are required to convert the analog information to digital, compress it and convert it back again while maintaining an acceptable level of voice quality. All of this means that digital cell phones have to contain a lot of processing power!

Cellular Access Technologies
There are three common technologies used by cell-phone networks for transmitting information:

• Frequency division multiple access (FDMA)
• Time division multiple access (TDMA)
• Code division multiple access (CDMA)

Although these technologies sound very intimidating, you can get a good sense of how they work just by breaking down the title of each one.

The first word tells you what the access method is. The second word, division, lets you know that it splits calls based on that access method.

• FDMA puts each call on a separate frequency.
• TDMA assigns each call a certain portion of time on a designated frequency.
• CDMA gives a unique code to each call and spreads it over the available frequencies.

The last part of each name is multiple access. This simply means that more than one user can utilize each cell.

 

Cellular Access Technologies: FDMA
FDMA separates the spectrum into distinct voice channels by splitting it into uniform chunks of bandwidth. To better understand FDMA, think of radio stations: Each station sends its signal at a different frequency within the available band. FDMA is used mainly for analog transmission. While it is certainly capable of carrying digital information, FDMA is not considered to be an efficient method for digital transmission.

In FDMA, each phone uses a different frequency

 

 

Cellular Access Technologies: TDMA
TDMA is the access method used by the Electronics Industry Alliance and the Telecommunications Industry Association for Interim Standard 54 (IS-54) and Interim Standard 136 (IS-136). Using TDMA, a narrow band that is 30 kHz wide and 6.7 milliseconds long is split time-wise into three time slots.

Narrow band means "channels" in the traditional sense. Each conversation gets the radio for one-third of the time. This is possible because voice data that has been converted to digital information is compressed so that it takes up significantly less transmission space. Therefore, TDMA has three times the capacity of an analog system using the same number of channels. TDMA systems operate in either the 800-MHz (IS-54) or 1900-MHz (IS-136) frequency bands.

TDMA splits a frequency into time slots.

Cellular Access Technologies: TDMA/GSM
TDMA is also used as the access technology for Global System for Mobile communications (GSM). However, GSM implements TDMA in a somewhat different and incompatible way from IS-136. Think of GSM and IS-136 as two different operating systems that work on the same processor, like Windows and Linux both working on an Intel Pentium III. GSM systems use encryption to make phone calls more secure. GSM operates in the 900-MHz and 1800-MHz bands in Europe and Asia, and in the 1900-MHz (sometimes referred to as 1.9-GHz) band in the United States. It is used in digital cellular and PCS-based systems. GSM is also the basis for Integrated Digital Enhanced Network (IDEN), a popular system introduced by Motorola and used by Nextel.

GSM is the international standard in Europe, Australia and much of Asia and Africa. In covered areas, cell-phone users can buy one phone that will work anywhere where the standard is supported. To connect to the specific service providers in these different countries, GSM users simply switch subscriber identification module (SIM) cards. SIM cards are small removable disks that slip in and out of GSM cell phones. They store all the connection data and identification numbers you need to access a particular wireless service provider.

Unfortunately, the 1900-MHz GSM phones used in the United States are not compatible with the international system. If you live in the United States and need to have cell-phone access when you're overseas, the easiest thing to do is to buy a GSM 900MHz/1800MHz cell phone for traveling. You can get these phones from Planet Omni, an online electronics firm based in California. They offer a wide selection of Nokia, Motorola and Ericsson GSM phones. They don't sell international SIM cards, however. You can pick up prepaid SIM cards for a wide range of countries at Telestial.com.

Cool Facts The GSM standard for digital cell phones was established in Europe in the mid-1980s -- long before digital cellular phones became commonplace in American culture. It is now possible to locate a person using a cellular phone down to a range of a few meters, anywhere on the globe. 3G (third-generation wireless) phones may look more like PDAs, with features such as video-conferencing, advanced personal calendar functions and multi-player gaming

 

 

Cellular Access Technologies: CDMA
CDMA takes an entirely different approach from TDMA. CDMA, after digitizing data, spreads it out over the entire available bandwidth. Multiple calls are overlaid on each other on the channel, with each assigned a unique sequence code. CDMA is a form of spread spectrum, which simply means that data is sent in small pieces over a number of the discrete frequencies available for use at any time in the specified range.

In CDMA, each phone's data has a u All of the users transmit in the same wide-band chunk of spectrum. Each user's signal is spread over the entire bandwidth by a unique spreading code. At the receiver, that same unique code is used to recover the signal. Because CDMA systems need to put an accurate time-stamp on each piece of a signal, it references the GPS system for this information. Between eight and 10 separate calls can be carried in the same channel space as one analog AMPS call. CDMA technology is the basis for Interim Standard 95 (IS-95) and operates in both the 800-MHz and 1900-MHz frequency bands. Ideally, TDMA and CDMA are transparent to each other. In practice, high-power CDMA signals raise the noise floor for TDMA receivers, and high-power TDMA signals can cause overloading and jamming of CDMA receivers. Cellular vs. PCS Personal Communications Services (PCS) is a wireless phone service very similar to cellular phone service, but with an emphasis on personal service and extended mobility. The term "PCS" is often used in place of "digital cellular," but true PCS means that other services like paging, caller ID and e-mail are bundled into the service. While cellular was originally created for use in cars, PCS was designed from the ground up for greater user mobility. PCS has smaller cells and therefore requires a larger number of antennas to cover a geographic area. PCS phones use frequencies between 1.85 and 1.99 GHz (1850 MHz to 1990 MHz). Technically, cellular systems in the United States operate in the 824-MHz to 894-MHz frequency bands; PCS operates in the 1850-MHz to 1990-MHz bands. And while it is based on TDMA, PCS has 200-kHz channel spacing and eight time slots instead of the typical 30-kHz channel spacing and three time slots found in digital cellular. Now let's look at the distinction between "dual band" and "dual mode" technologies. Dual Band vs. Dual Mode If you travel a lot, you will probably want to look for phones that offer dual band, dual mode or both. Let's take a look at each of these options: Dual band - A phone that has dual-band capability can switch frequencies. This means that it can operate in both the 800-MHz and 1900-MHz bands. For example, a dual-band TDMA phone could use TDMA services in either an 800-MHz or a 1900-MHz system. Dual mode - In cell phones, "mode" refers to the type of transmission technology used. So, a phone that supported AMPS and TDMA could switch back and forth as needed. It's important that one of the modes is AMPS -- this gives you analog service if you are in an area that doesn't have digital support. Dual band/Dual mode - The best of both worlds allows you to switch between frequency bands and transmission modes as needed. Changing bands or modes is done automatically by phones that support these options. Usually the phone will have a default option set, such as 1900-MHz TDMA, and will try to connect at that frequency with that technology first. If it supports dual bands, it will switch to 800 MHz if it cannot connect at 1900 MHz. And if the phone supports more than one mode, it will try the digital mode(s) first, then switch to analog. Sometimes you can even find tri-mode phones. This term can be deceptive. It may mean that the phone supports two digital technologies, such as CDMA and TDMA, as well as analog. But it can also mean that it supports one digital technology in two bands and also offers analog support. A popular version of the tri-mode type of phone for people who do a lot of international traveling has GSM service in the 900-MHz band for Europe and Asia and the 1900-MHz band for the United States, in addition to the analog service. In the next section, we'll touch on some of the problems encountered with cellular phones Problems with Cell Phones A cell phone, like any other consumer electronic device, has its problems: Generally, non-repairable internal corrosion of parts results if you get the phone wet or use wet hands to push the buttons. Consider a protective case. If the phone does get wet, be sure it is totally dry before you switch it on so you can try to avoid damaging internal parts. Extreme heat in a car can damage the battery or the cell-phone electronics. Extreme cold may cause a momentary loss of the screen display. Analog cell phones suffer from a problem known as "cloning." A phone is "cloned" when someone steals its ID numbers and is able to make fraudulent calls on the owner's account. Here is how cloning occurs: When your phone makes a call, it transmits the ESN and MIN to the network at the beginning of the call. The MIN/ESN pair is a unique tag for your phone -- this is how the phone company knows who to bill for the call. When your phone transmits its MIN/ESN pair, it is possible for nefarious sorts to listen (with a scanner) and capture the pair. With the right equipment, it is fairly easy to modify another phone so that it contains your MIN/ESN pair, which allows the nefarious sort to make calls on your account. Check out the next section to find out about cell-phone towers Cell-phone Towers A cell-phone tower is typically a steel pole or lattice structure that rises hundreds of feet into the air. This cell-phone tower along I-85 near Greenville, SC, is typical in the United States: This is a modern tower with three different cell-phone providers riding on the same structure. If you look at the base of the tower, you can see that each provider has its own equipment, and you can also see how little equipment is involved today (older towers often have small buildings at the base): Here is the equipment owned by one of the providers: The box houses the radio transmitters and receivers that let the tower communicate with the phones. The radios connect with the antennae on the tower through a set of thick cables: If you look closely, you will see that the tower and all of the cables and equipment at the base of the tower are heavily grounded. For example, the plate in this shot with the green wires bolting onto it is a solid copper grounding plate: One sure sign that multiple providers share this tower is the amazing five-way latch on the gate. Any one of five people can unlock this gate to get in! Cell-phone towers come in all shapes and sizes, but I do believe this one in Morrisville, NC, is one of the weirdest looking! That is one tall, ugly tree!     nique code.

 

 

Cell phone radiation

 

Just by their basic operation, cell phones have to emit a small amount of electromagnetic radiation. If you've read How Cell Phones Work, then you know that cell phones emit signals via radio waves, which are comprised of radio-frequency (RF) energy, a form of electromagnetic radiation.

There's a lot of talk in the news these days about whether or not cell phones emit enough radiation to cause adverse health effects. The concern is that cell phones are often placed close to or against the head during use, which puts the radiation in direct contact with the tissue in the head. There's evidence supporting both sides of the argument.

In this article, we will further explore this controversial issue. You'll find out how cell phones generate radiation and how they are tested for radiation levels.

Source of Radiation
When talking on a cell phone, a transmitter takes the sound of your voice and encodes it onto a continuous sine wave (see How Radio Works to learn more about how sound is transmitted). A sine wave is just a type of continuously varying wave that radiates out from the antenna and fluctuates evenly through space. Sine waves are measured in terms of frequency, which is the number of times a wave oscillates up and down per second. Once the encoded sound has been placed on the sine wave, the transmitter sends the signal to the antenna, which then sends the signal out.

Radiation in cell phones is generated in the transmitter and emitted through the antenna.

Cell phones have low-power transmitters in them. Most car phones have a transmitter power of 3 watts. A handheld cell phone operates on about 0.75 to 1 watt of power. The position of a transmitter inside a phone varies depending on the manufacturer, but it is usually in close proximity to the phone's antenna. The radio waves that send the encoded signal are made up of electromagnetic radiation propagated by the antenna. The function of an antenna in any radio transmitter is to launch the radio waves into space; in the case of cell phones, these waves are picked up by a receiver in the cell-phone tower.

 

Electromagnetic radiation is made up of waves of electric and magnetic energy moving at the speed of light, according to the Federal Communications Commission (FCC). All electromagnetic energy falls somewhere on the electromagnetic spectrum, which ranges from extremely low frequency (ELF) radiation to X-rays and gamma rays. Later, you will learn how these levels of radiation affect biological tissue.

When talking on a cell phone, most users place the phone against the head. In this position, there is a good chance that some of the radiation will be absorbed by human tissue. In the next section, we will look at why some scientists believe that cell phones are harmful, and you'll find out what effects these ubiquitous devices may have.

Potential Health Risks
In the late 1970s, concerns were raised that magnetic fields from power lines were causing leukemia in children. Subsequent epidemiological studies found no connection between cancer and power lines. A more recent health scare related to everyday technology is the potential for radiation damage caused by cell phones. Studies on the issue continue to contradict one another.

All cell phones emit some amount of electromagnetic radiation. Given the close proximity of the phone to the head, it is possible for the radiation to cause some sort of harm to the 118 million cell-phone users in the United States. What is being debated in the scientific and political arenas is just how much radiation is considered unsafe, and if there are any potential long-term effects of cell-phone radiation exposure.

There are two types of electromagnetic radiation:

• Ionizing radiation - This type of radiation contains enough electromagnetic energy to strip atoms and molecules from the tissue and alter chemical reactions in the body. Gamma rays and X-rays are two forms of ionizing radiation. We know they cause damage, which is why we wear a lead vest when X-rays are taken of our bodies.
• Non-ionizing radiation - Non-ionizing radiation is typically safe. It causes some heating effect, but usually not enough to cause any type of long-term damage to tissue. Radio-frequency energy, visible light and microwave radiation are considered non-ionizing.

On its Web site, the FDA states that "the available scientific evidence does not demonstrate any adverse health effects associated with the use of mobile phones." However, that doesn't mean that the potential for harm doesn't exist. Radiation can damage human tissue if it is exposed to high levels of RF radiation, according to the FCC. RF radiation has the ability to heat human tissue, much like the way microwave ovens heat food. Damage to tissue can be caused by exposure to RF radiation because the body is not equipped to dissipate excessive amounts of heat. The eyes are particularly vulnerable due to the lack of blood flow in that area.

Cell-phone use continues to rise, which is why scientists and lawmakers are so concerned about the potential risks associated with the devices.

The added concern with non-ionizing radiation, the type of radiation associated with cell phones, is that it could have long-term effects. Although it may not immediately cause damage to tissue, scientists are still unsure about whether prolonged exposure could create problems. This is an especially sensitive issue today, because more people are using cell phones than ever before. In 1994, there were 16 million cell-phone users in the United States alone. As of July 17, 2001, there were more than 118 million.

Here are a few illnesses and ailments that have potential links to cell-phone radiation:

• Cancer
• Brain tumors
• Alzheimer's
• Parkinson's
• Fatigue
• Headaches

Studies have only muddled the issue. As with most controversial topics, different studies have different results. Some say that cell phones are linked to higher occurrences of cancer and other ailments, while other studies report that cell-phone users have no higher rate of cancer than the population as a whole. No study to date has provided conclusive evidence that cell phones can cause any of these illnesses. However, there are ongoing studies that are examining the issue more closely.

Look Ma, No Hands! If you are worried about the potential hazards of cell-phone radiation, here are few ways to reduce your risk: Use a hands-free headset. Use a phone that places the antenna as far away from you as possible. Extend the antenna during use. Limit calls inside buildings. Use the phone in open spaces as often as possible. Limit use by children.

At high levels, radio-frequency energy can rapidly heat biological tissue and cause damage such as burns, according to a recent report from the U.S. General Accounting Office (GAO), a nonpartisan congressional agency that audits federal programs. The report went on to state that mobile phones operate at power levels well below the point at which such heating effects would take place. The amount of radiation emitted from the devices is actually minute, and the U.S. federal government places limits on how much radiation a cell phone can emit.

Testing for Radiation
Every cell-phone model has to be tested and meet FCC standards before it is allowed to be sold in the United States. Testing is primarily done by the manufacturers themselves, which creates some uncertainty about the testing procedures, according to a GAO report.

The exposure limit set by the FCC for cell phones is based on the overall heating effects of radio-frequency energy. The exposure limit was established by the FCC in 1996. A year later, the FCC published non-mandatory testing guidelines that helped manufacturers comply with exposure limits. The FCC still allows other testing techniques once an FCC review of the procedures is completed.

Radiation levels are tested based on the specific absorption rate (SAR), which is a way of measuring the amount of radio-frequency energy that is absorbed by the human body. In order to gain an FCC license, a phone's maximum SAR level must be less than 1.6 watts per kilogram (W/kg). In 2000, the Cellular Telecommunications & Internet Association (CTIA) ordered cell-phone manufacturers to place labels on phones disclosing radiation levels.

Photo courtesy U.S. General Accounting Office A probe attached to a mechanical arm is directed to take SAR measurements throughout a human-shaped mold. The mold is filled with a liquid mixture that simulates the electrical properties of human tissue.

Testing techniques vary somewhat, but are generally pretty standard. The GAO report "Research and Regulatory Efforts on Mobile Phone Health Issues," published in May 2001, describes how SAR levels are checked. Here is what the report described:

1. A mold shaped like a human head and torso is filled with a fluid mixture that is designed to simulate the electrical properties of human tissue.
2. The cell phone under review is placed on the outside of the mold.
3. A probe attached to a computer-controlled mechanical arm is inserted into the mixture at various locations.
4. The phone is made to transmit a signal at full power while the probe is moved through the mixture.

During the test, the phone's antenna is extended and retracted in order to check for any fluctuations in radiation that the phone might demonstrate in different configurations. The manufacturer is supposed to submit the highest SAR level measured during these tests to the FCC. Phones are required to test below 1.6 W/kg averaged over 1 gram of fluid.

To find the specific absorption rate of your phone, you can visit this FCC Web site. Your phone should have an FCC identification code. Type that code in the correct field and the site should offer information on your device.

Due to the lack of any industry-wide testing standard, the FCC must evaluate the individual procedures used by each manufacturer in certifying the SAR level of each new phone, according to the GAO report.

It's still unclear as to whether cell phones actually cause any significant damage to the human body. Studies continue to contradict one another on the issue. Additional studies may shed some light on the true effects of cell-phone radiation, but will likely only confuse consumers even further. In the meantime, millions of cell-phone users take whatever risk may be involved in using the devices.

 

WHY CELL PHONES NOT ALLOWED TO USE IN AIRWAYS

I've noticed that I am not allowed to use my cell phone in airplanes or in hospitals. Why are these prohibitions in place?
Most of us experience electromagnetic interference on a fairly regular basis. For example: If I put my cell phone down on my desk near the computer, I can hear loud static in my computer's speakers every time the phone and the tower handshake. In the same way, my car's tape player produces loud static whenever I make a call on my cell phone. When I dial a number on my home's wireless phone, I can hear the number being dialed through the baby monitor. It is not uncommon for a truck to go by and have its CB radio overwhelm the FM station I am listening to. Most of us have come across motors that cause radio or TV static. None of these things, technically, should be happening. For example, a truck's CB radio is not transmitting on the FM radio bands, so my radio should never hear CB signals. However, all transmitters have some tendency to transmit at lower power on harmonic side bands, and this is how the FM radio picks up the CB. The same thing holds true for the wireless phone crossing over to the baby monitor. In the case of the cell phone affecting the computer's speakers, the wire to each speaker is acting like an antenna, and it picks up side bands in the audible range. These are not dire problems -- they are just a nuisance. But notice how common they are. In an airplane, the same phenomena can cause big trouble. An airplane contains a number of radios for a variety of tasks. There is a radio that the pilots use to talk to ground control and air traffic control (ATC). There is another radio that the plane uses to disclose its position to ATC computers. There are radar units used for guidance and weather detection, and so on. All of these radios are transmitting and receiving information at specific frequencies. If someone were to turn on a cell phone, the cell phone would transmit with a great deal of power (up to 3 watts). If it happens to create interference that overlaps with radio frequencies the plane is using, then messages between people or computers may be garbled. If one of the wires in the plane has damaged shielding, there is some possibility of the wire picking up the phone's signals just like my computer's speakers do. That could create faulty messages between pieces of equipment within the plane. Many hospitals have installed wireless networks for equipment networking. For example, look at the picture of the heart monitor in How Emergency Rooms Work. The black antenna sticking out of the top of the monitor connects it back to the nursing station via a wireless network. If you use your cell phone and it creates interference, it can disrupt the transmissions between different pieces of equipment. That is true even if you simply have the cell phone turned on -- the cell phone and tower handshake with each other every couple of minutes, and your phone sends a burst of data during each handshake. The prohibition on laptops and CD players during takeoff and landing is addressing the same issue, but the concerns here might fall into the category of "better safe than sorry." A poorly shielded laptop could transmit a fair amount of radio energy at its operating frequency, and this could, theoretically, create a problem